HVG OFFSHORE EQUIPMENT 0060: Solar LED Marine Light
- 1. Based on LED technics, its color is in accordance with IALA Recommendations E-200-1;
- 2. Integrated design of lamp body to achieve the protection level IP68;
- 3. PC material, anti UV, anti vibration and corrosion resistance;
- 4. With bird proof device;
- 5. 256 kinds of characters to be adjustable to meet requirements of IALA;
- 6. Light intensity 25%,50%,75%,100% to be adjustable;
- 7. Photoelectric automatic control, with manual switch;
- 8. Humanization design, with anti-fall device during the process of installation and adjustment ;
- 9. Built-in nickel metal hydride battery, easy to replace;
- 10. No radio frequency, no electromagnetic interface;
- 11. Stable working performance, low cost
Application: Applicable to offshore buoys, inland river bouys, shore beacons, fixed light beacons, offshore oil derrick signal lamps and so on.
Installation Method and Precautions
- 1. Please read the instruction carefully and use the product correctly;
- 2. Solar lamp must be installed to the place where can get full sunlight to ensure it can work continously;
- 3. Place the lamp on the vertical mounting surface with the lamp axis; the mounting surface should be smooth and sufficient in mechanical strength;
- 4. If the light is not bright during the first use, please put the lamp in the sunlight for 12 hours or plug in the charger to get power; then it can work normally
- ( during the charging process, the manual switch should be placed in the ON side, otherwise it can not be charged);
- 5. For long time storage, the StAt should be turned to OFF and place the light in the dry sub humid place; please take out the solar panels and put it in sunlight for three days or use charger to get full energy every 40 days to ensure the battery capacity;
- (please put the manual switch on the ON side in the case of sun exposure)
- 6. Bulit-in nickel metal hydride batteries, after the use of 450 times (15months), the battery capacity is about 80% of the initial, please replace the battery in time;
- 7. To protect batteries from damage during the shipping and storage, the lamp bottom is installed with a manual switch and set into OF status; before installation or testing, please set the manual switch into ON side, and then adjust the character and light intensity you need;
- 8. If you face any problem when using the products, please feel free to contac us.
