HVG OFFSHORE EQUIPMENT 0059: Solar Navigation Mark Light
- 1. Based on LED technics, its color is in accordance with IALA Recommendations E-200-1;
- 2. Integrated design of lamp body to achieve the protection level IP68;
- 3. PC material, anti UV, anti vibration and corrosion resistance;
- 4. With bird proof device;
- 5. 256 kinds of characters to be adjustable to meet requirements of IALA;
- 6. Light intensity 25%,50%,75%,100% to be adjustable;
- 7. Photoelectric automatic control, with manual switch;
- 8. Humanization design, with anti-fall device during the process of installation and adjustment ;
- 9. Built-in nickel metal hydride battery, easy to replace;
- 10. No radio frequency, no electromagnetic interface;
- 11. Stable working performance, low cost
Application: Applicable to offshore buoys, inland river bouys, shore beacons, fixed light beacons, offshore oil derrick signal lamps and so on.
Installation Size Chart
Character and Light Intensity Adjustment
Adjustment Method
1. Open the lid of the box on the four screws; take the lamp and then open the rotating plug according the the OPEN direction of the rotating plug on the lamp bottom; then you can see the manual switch, light intensity adjustment and characters adjustment device.
2. Switch Adjustment Method: Open, adjust the manual switch to the ON side; Close, adjust the manual switch to the OFF side.(Note: under the condition of ON, only in less than 300LX±100LX illumination, the lamp will be bright.)
3. Character Adjustment Method: adjust manually the encoder SWA and SWB, each adjustment is corresponding to a set of lights.
4. 256 kinds of characters are described in the instruction manual,characteristics of light instructions (6 kinds of characters can be customized)
| Encoding Light | Meaning |
| F | Fixed |
| FL | Flicker Frequency during Fixed Time, e.g. FL(2) 5.5S Flicker twice every 5.5s |
| Q | Quick Flash |
| VQ | Very Quick Flash |
| OC | Occulting Light, Longer than the timeout |
| ISO | Equal Light, light time is equal to light off time |
| LFL | Long Time, Long Flash |
| MO | Morse Signal,including Characters |
For example: VQ(6)+LFL 15 S. A long flash after 6 times quick flashes within 15 seconds
5. Light Intensity Adjustment Method: adjust manually 1 and 2 of the dial switch SW1;the different position of the two dial number 1 and 2 means different light intensity. The detailed light intensity values can be found in the light intensity adjustment diagram on the left side.
