HVG MARINE LIFE-SAVING EQUIPMENT 0191: GT100 Thermal Protective Aid
The quality of your equipment can sometimes be life-saving. This becomes more obvious when knowing that a leap into freezing water without a protective garment can be fatal. Even when surviving the initial cold shock, a loss of consciousness within a few minutes will finally lead to drowning. The GT100 Thermal Protective Aid is manufactured with safety and quality in mind. Manufactured by one of the largest producers of rescue suits, the GT100 Thermal Protective Aid has been made using a level of experience which is not easily found on the market.
Product Information:
- Variable Overall Which Is Used For Rescue Operations At Sea and Disaster Control
- 3-Layer Tear-Proof Nylon with A Breathable Membrane (5.0 Litres per M² per 24 Hours) Watertight Main Zipper from Left Hip around the Neck to the Left Shoulder
- Attached Hood Made Out Of 2.0 Mm Neoprene Increased Wearing Comfort through Elastic Suspenders
- All Seals Made Of Heavy-Duty Latex
- Heavy-Duty Pads on Knees, Elbows and Bottom High Safety Boots with Steel Caps (EN Protection Class 5) Attached To the Suit
- Knee Pockets for Adding Further Protective Cushions
- Does Not Replace the 6-Hours Immersion Suit According To SOLAS (For This Purpose See ARO V20 and ARO V40)
- Arm Seals Are Compatible With Optional Dry-Glove Ring-Systems
- 5-Finger Semidry Gloves Made Of 3.0 mm Neoprene (To Be Stored In the Arm Pockets)
- Large Pocket Attached To the Outside of the Suit
