Home
Products
Marine & Offshore Equipment
HVG MARINE MOORING EQUIPMENT 0368

HVG MARINE MOORING EQUIPMENT 0368

HVG MARINE MOORING EQUIPMENT 0368

Can be called ‘bulwark chock’, is located in the bulwarks, with closed hole shaped fairlead limit position of the cable are derived. Its basic shape is circular, oval,

Do not know if you understand?

specific requirement summary explaining its technology introduction:

1: the mooring chock body material selection in accordance with GB 8162 204 seamless steel tube. Can also be specified in GB 712 A grade of steel plate is bend into.
2: Stainless steel clad plate selection in accordance with GB 4237 use 1Cr18Ni9Ti stainless steel plate .
3: the mooring chock body at intersecting line and the outer rim, welding surface clean and no crack, war page, skew, Cut straight to sharp edges.
4: mooring chock stainless steel clad plate shall be flat and body joint, the weld shall be no pores, cracks, burrs and lack of Depression.
5: mooring chock completion except stainless steel clad plate, should brush rustproof paint. After loading the goods on board according to the requirements of ship hull paint.

Technical specification:

Technical specification

Type (mm)	L	L1	L2	H	H1	H2	B	C	Weight (kg)	Manila Rope (Dia.)	Wire Rope (Dia.)
150	150	300	270	110	260	202	129	40	15.1	40	16(6×12)
200	200	368	334	150	318	250	143	42	20.5	45	18(6×12)
250	250	430	394	200	380	308	155	44	26.9	50	20(6×12)
300	300	500	460	250	450	372	169	52	42.7	60	22.4(6×12)
350	350	560	518	250	460	378	179	55	50.8	70	24(6X24)
400	400	632	586	250	482	394	195	60	76.3	80	26(6X24)
450	450	700	650	250	500	406	209	62	102	85	30(6X24)
500	500	760	708	250	510	412	219	65	115	90	35.5(6X24)