HVG MARINE RUBBER AIRBAG 0001

Shipyard Launching and Docking Vessel Roller Marine Airbag 2m x 15m 8 layers

General Introduction:

Marine airbags are widely used for ship launching and docking in shipyards, specially medium and small shipyards alongside rivers and seasides in Asian and American countries. Marine airbags are often called ship launching airbags that indicate the most popular application of these heavy duty airbags is for ship launching. It is estimated that more than 80 percent new built ships who’s DWT below 60,000 are launched by marine airbags.

Launching with marine airbags is flexible. Any flat ground with a little declining angle can be taken as a slip way. Airbags can sucessfully launch a ship even on a bank 1 or 2 meters over water level.

Key Features of Marine Airbags :

1. Flexible in various launching projects: Airbags can be made to be specified sizes and layers as per the requirement of different launching projects.
2. Easy Operation: The operation of launching vessels with rubber airbags is releatively easy, just laying out and inflating the airbags to lift the vessels and roll them to the water. It has not strict requirement on slipway conditions. Ship launching can be executed even in tough conditions.
3. Durable and recycled: Marine Airbags can be used many times repeated.
4. High economy: As marine airbags can be used repeatedly and its cost is not high, launching or docking ships with marine airbags can save much cost for shipyards or ship owners.

Technical specification:

Below is a chart for the bearing capacity of several sizes

Size	Diameter	1.0m, 1.2m, 1.5m, 1.8m, 2.0m, 2.2m, 2.5m, 2.8m, 3.0m
Size	Effective Length	6m, 10m, 12m, 15m, 18m, 20m, 22m, 24m, etc
Layers		4 layers, 5 layers, 6 layers, 8 layers, 10 layers, 12 layers

Model	Dia	Effective Length	Overall Length	Cord Layer	Rubber Plate	Thickness	Working Pressure	Bursting Pressure	Lifting Height	Bearing Capacity
	M	M	M	Layer	Layer	mm	MPa	MPa	M	Ton/meter	Ton/airbag
LH-6	1.2	12	14	6	1	7.2	0.17	0.75	0.90	7.85	94.20
									1.00	5.23	62.76
									1.10	2.62	31.44
LH-7	1.5	15	17	7	1	8.2	0.16	0.70	1.00	12.21	183.15
									1.10	9.77	146.55
									1.20	7.33	109.95
									1.30	4.89	73.35
LH-8	1.8	18	20.5	8	1	9.2	0.15	0.67	1.20	13.96	251.28
									1.30	11.63	15.12
									1.40	9.31	167.58
									1.50	6.98	125.64
									1.60	4.65	83.70
LH-10	2.0	20	23	10	1	11.2	0.17	0.75	1.30	18.32	366.40
									1.40	15.70	21.98
									1.50	13.09	261.80
									1.60	10.47	209.40
									1.70	7.85	157.00