HVG MARINE FENDER 0007

HVG MARINE FENDER 0007: PU Coated Sqare Foam Fenders and Pads for Jetty and Bridge Piers and Piles

General Introduction

Square FoamMarine Fenders or Pads are another type of marine foam fender. It is designed for large and thick bridge piers or piles. It can also be used for quays for passager boats because they do not leave marks on hulls. The material is also non-marking and can be produced in various striking colours.

The core of this floating fender has a high density and thus readily absorbs energy. The foam used to fill the fender is a closed cell foam material, so even when the skin gets damaged, water will not fill the floating foam filled fender.

Advantages and Features of Square Foam Marine Fenders

1. Wide range of standard and custom sizes available
2. Low reaction and high energy absorption
3. Operate floating or suspended
4. No marks or stains left even on white hull
5. Easy installation and Low maintenance
6. Long service life for 10-20 years

Technical specification:

Available Sizes and Performance of Square Foam Fenders

Size (m)		At 60% Compression
Width	Length	Force Reaction (KJ)	Energy Absportion (KN)
0.50	1.00	8.00	71.00
0.70	1.50	27.00	61.00
1.00	1.50	49.00	205.00
1.20	2.00	93.00	337.00
1.35	2.50	145.00	463.00
1.50	3.00	273.00	696.00
2.00	3.50	456.00	990.00
2.50	4.00	781.00	1386.00
2.50	5.00	985.00	1750.00
3.00	5.00	1410.00	2050.00
3.00	6.00	1695.00	2460.00
3.30	6.50	2245.00	2950.00
4.50	9.00	7660.00	19650.00