• ELECTRIC EQUIPMENT 0051
    HVG MARINE ELECTRIC EQUIPMENT 0051

    HVG MARINE ELECTRIC EQUIPMENT 0051: 150W & 250W MF/HF Digital SSB Radio Telephone

    This is an MF/HF SSB (single side band) radiotelephone with a built-in DSC/watch receiver. The built-in DSC/watch receiver produces and receives digital selective calls for quick and efficient establishment of distress, urgency, safety and routine communications with other ships and coast stations than install any MH/HF DSC facilities. Data is displayed on a large, easy-to-read backlit LCD. Operation is simplified by the use of few keys and easy-to-follow menus. Besides, an NBDP (narrow band direct printing) Terminal Unit is optionally available.

    Features:

    • Fully meets the following regulations: IMO A.694(17), IMO A.804(19), IMO A.806(19), IMO A. 813(19), IMO MSC 68(68), IEC 60945, IEC61907-3/8/9, IEC-61162-1, EIV-300/333, ITU-R M.493-10, M.541-8, M.1082-1, EN 300 373, EN300 338, EN300 033, and ETS 300 067
    • PSTN(public switched telephone network) capability standard
    • Distress, safety and routine calling
    • Scanning of DSC frequencies for distress and general calls on MF/HF
    • File editing capability for readiness in case of emergency
    • Automatic error-free telex communications and distress message in compliance with GMDSS requirements

    Technical specification:

    • General
    • Transmitter
    • Receiver
    • DSC/Watch Receiver

    1. Communication system: semi-duplex or simplex

    2. Class of emission: J3E: telephone, J2B(F1B): DSC or NBDP, H3E: reception only

    3. Frequency range: 100.00KHz to 29,999.99 KHz

    4. Number of channel: users programmable: 255Tx/Rx pairs, all ITU channels incorporated(include DSC/NBDP channels), 2182KHz (single action)

    5. Display method: monochrome LCD(20×64dots)

    6. Backlight: 8 tones

    7. Contrast: 64 steps

    8. Warming up: 1 minute approx.(oven 20 minutes approx.)

    1. Frequency range: 1,606.5KHz to 26.175MHz (100Hz steps)

    2. RF output power: model-1: 150W, model-2: 250W

    3. Frequency resolution: within ±10Hz

    4. Modulation AF response: 360Hz to 2.7 KHz

    5. Modulation system: low power balanced modulation

    6. AF input: -46dBm/600ohms (handset/microphone), -10dBm/600ohms (handsetHS-2001)

    7. Line in: 0dBm/600 ohms

    1. Receiving system: double-conversion superheterodyne

    2. Frequency range: 100KHz to 29,999.9KHz (10Hz steps)

    3. Sensitivity: input level at 10 ohms +250pF (below 4MHz) and 50 ohms (above 4MHz) to produce SINAD 20dB

    Frequency range J3E/H3E
    100KHz to 300KHz 35 dB
    300KHz to 1.6MHz 25 dB
    1.6MHz to 4.0MHz 13 dB
    4.0MHz to 30 MHz 7 dB

    4. Intermediate frequency: 1st: 72,455KHz, 2nd: 455KHz

    5. Selectivity: J3E: 2.4KHz at -6dB, H3E: 6KHz at -6dB, J2B(F1B): 300Hz at -6dB

    6. Inter-modulation: better than 80dB

    7. Spurious response: better than 70dB

    8. AGC: slow/fast/off

    9. BFO frequency: Telex/DSC: 1,700Hz, facsimile: 1,900Hz

    10. Audio output power:

    Internal speaker: 1W/8Ω, External speaker: 4W/4Ω

    Handset: 2.5mW/150Ω, Line output: 0dBm/600Ω

    1. Frequency range:

    MF: 2187.5Khz, HF: 8414.5/4207.5/6312/12577/16804.5KHZ

    2. Class of emission: F1B, J2B

    3. Antenna impedance: 50Ω

    4. Local oscillator: 1st: F+54,455KHz, 2nd: 54,000KHz, 3rd: 456.7KHz

    5. Frequency stability: ±10Hz

    6. Intermediate frequency: 1st: 54,455KHz, 2nd: 455KHz

    7. Selectivity: -6dB: 270Hz to 300Hz, -30dB: within ±380Hz, -60dB: within ±550Hz

    8. Receiving system: double-conversion superheterodyne

    9. Radiation: within 2nW

    10. Rx error rate: 1% or less at 1uV input voltage

    11. Spurious response: 31.6 mV non-modulated at 10uV input voltage, at error rate within 1%

    12. Scanning reception: max. 6 frequencies within 2s (MF/HF)

    13. Diagnosis: transmit high frequency signal of DSC