HVG MARINE ANODE 0004

HVG MARINE ANODE 0004: Magnesium Anode

Our company produces magnesium alloy sacrificial anode by using high quality raw materials, mature production technology and advanced equipment inspection, to ensure that every anode is in line with national standards.

Small proportion, with a high chemical activity;
The potential is negative and the driving potential is large;
Large theoretical capacity and low polarization;
Especially suitable for high resistivity medium (If the resistivity is greater than 100Ω•m, the ribbon magnesium anode is proposed)

Implementing Standards

GB/T 17731-2009 “Magnesium Alloy Sacrificial Anode”
GB/T 21488-2008 “Technical Specification for Cathodic Protection of Buried Steel Pipeline”

Scope of Application

Applicable to anti-corrosion protection of the oil, gas, water supply and drainage pipelines in soil medium, as well as the protection of harbor, ship, reservoir gate and other projects in water.

Magnesium Sacrificial Anode Classifications

Magnesium Alloy Anode for Oil Well Casing
Prepackaged Magnesium Alloy Sacrificial Anode with Backfill
High Potential Magnesium Alloy Sacrificial Anode D Type
Extruded Ribbon Type Magnesium Alloy Sacrificial Anode
Extruded Magnesium Anode Rod

Matters Need Attention in Use

Avoiding the collision with the steel structure;
Should be buried in the low-lying and damp places; the anode must be packed in filling bag before being buried in soil;
After being placed in the ground, the filling bag with anodes should be soaked with water before being covered by soil.

Technical specification:

Chemical Composition
Electrochemical Performance
Standard Specification for Magnesium Anode

Grade	Alloying Elements				Impurity Elements (no greater than)
Grade	Al	Zn	Mn	Mg	Fe	Cu	Ni	Si	Ca
MGAZ63B	5.3-6.7	2.5-3.5	0.15-0.60	margin	0.003	0.01	0.001	0.08	–
MGAZ31B	2.5-3.5	0.60-1.4	0.20-1.0	margin	0.003	0.01	0.001	0.08	0.04
MGM1C	≤0.01	–	0.50-1.3	margin	0.01	0.01	0.001	0.05	–
MG	≤0.02	≤0.03	≤0.01	≥99.9%	0.005	0.004	0.001	0.01	–

Grade	Open Circuit Potential	Closed Circuit Potential	Actual Capacitance	Current Efficiency
Grade	-V,Cu/CuSO4	-V,Cu/CuSO4	-(A*h/kg)	%
MGAZ63B	1.57-1.67	1.52-1.57	≥1210	≥55
MGAZ31B	1.57-1.67	1.47-1.57	≥1210	≥55
MGM1C	1.77-1.82	1.64-1.69	≥1100	≥50

Size	Specification	Weight (kg)
Size	Length(upper bottom+lower bottom)Height	Weight (kg)
MG-22	700×(130+150)×125	22.00
MG-14	700×(120+100)×102	14.00
MG-11	700×(110+90)×88	11.00
MG-8	700×(95+75)×75	8.00
MG-4	350×(95+75)×75	4.00
MG-2	350×(55+60)×55	2.00
Note: size can also be produced according to customer’s requirements