HVG OTHER INDUSTRIAL EQUIPMENT 0230

HVG OTHER INDUSTRIAL EQUIPMENT 0230: Dây hàn bọc thông lượng bằng khí

Đối với dây hàn bằng thép cacbon, thực hiện tiêu chuẩn GB / T10045-2001. Đối với dây hàn bằng thép có chất trợ dung bằng thép hợp kim thấp, thực hiện tiêu chuẩn GB / T17493-1998. Đối với dây hàn bằng thép không gỉ, thực hiện giá đỡ GB / T17853-1999.

(1) Theo các thông số nhất định, có thể hàn mọi vị trí.
(2) Tỷ lệ lắng đọng cao. Thuận tiện để điều chỉnh các thành phần hợp kim.
(3) Lõi thông lượng có thể thay đổi đặc tính của truyền kim loại để giảm các hạt văng và cải thiện quá trình đúc mối hàn.
(4) Bởi vì nó dễ bay hơi với CO2 và bùn, nên có thể tránh được một cách hiệu quả các lỗ thổi.
(5) Hầu như không bị bắn.

Technical specification:

Technical specification

GB	AWS	Current	Main Applications
E500T-1	E70T-1C	DC+	It is a kind of titania type CO2 gas-shielded flux-cored welding wire used for surfacing welding. Suitable for the situation of impact-resistance and medium wear. Used for repairing the surfaces of low-carbon steel, medium-carbon steel or low-alloy steel parts, such as the surfacing welding and repairing of mining machinery and agricultural machinery.
	E70T-5C	DC+	Suitable for the situation of impact-resistance and medium wear. Used for surfacing welding on some worn-out gears, dredge buckets, tractor blades, deep digging blade ploughs, mining machinery, etc.
E501T-1	E71T-1 C	DC+	Suitable for the situation of impact-resistance and medium wear. Used for single layer or multi-layer surfacing welding and repairing of the surfaces of all kinds of worn-out parts, such as gears, dredge buckets, mining machinery, etc.
E501T-1	E71T-1	DC+	Used for welding structures made of carbon steel and low-alloy structural steel with tensile strength higher than or equal to 490MPa. Most widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, boilers, petroleum machinery, chemical machinery, hoisting machinery, etc.
E501T1-G	E71T1-G	DC+	Used for welding structures made of low temperature steel and low-alloy structural steel. Widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, storage tanks, petroleum machinery, chemical machinery, ocean structures, etc.
	E71T-1C-J	DC+	Suitable for welding some steel structures like railway locomotive vehicles, containers, etc. made of 09CuPCrNi, 09CuTiRe and 09CuPRe steel.
E500T-1	E70T-1	DC+	Used for welding structures made of carbon steel and low-alloy structural steel with tensile strength higher than or equal to 490MPa. Most widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, boilers, petroleum machinery, chemical machinery, hoisting machinery, etc.
E550T1-Ni1	E80T1-Ni1	DC+	Used for welding structures made of low temperature steel and low-alloy high strength steel. Widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, storage tanks, petroleum machinery, chemical machinery, ocean structures, etc.
E500T-5	E70T-5	DC+	Used for welding carbon steel and low-alloy structural steel with tensile strength higher than or equal to 490MPa. Used for welding some key structures like shipbuilding, vehicles, mechanical manufacture, pressure vessels, petrochemical machinery, hoisting machinery, etc.
E551T1-Ni1	E81T1-Ni1	DC+	Used for welding structures made of low temperature steel and low-alloy structural steel. Widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, storage tanks, petroleum machinery, chemical machinery, ocean structures, etc.
E551T1-Ni2	E81T1-Ni2	DC+	Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.
E551T1-W	E81T1-W2	DC+	Used for welding 590MPa atmospheric corrosion-resistant steel structures, such as railway locomotive vehicles, offshore engineering, bridges, etc.
E551T1-Ni1	E81T1-Ni1	DC+	Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.
E551T1-K2	E81T1-K2	DC+	Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.
E551T1-Ni2	E81T1-Ni2	DC+	Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.
E551T1-B2	E81T1-B2	DC+	Suitable for welding 1％Cr－0.5％Mo (such as 15CrMo) steel below 520℃.
	E80T5-B2C	DC+	Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.
	E81T1-B2C	DC+	Suitable for welding 1％Cr－0.5％Mo (such as 15CrMo) steel below 520℃.
E601T1-B3	E91T1-B3	DC+	Suitable for welding 2.25％Cr－1％Mo steel below 520℃.
E308LT1-1	E308LT1-1		Used for welding corrosion-resistant 0Cr19Ni9 and 0Cr19Ni11Ti stainless steel structures below 300℃. Used for welding some stainless steel materials like 301, 302, 304, 304L, 308, 308L, etc.
E309LT1-1	E309LT1-1		Used for stainless steel structures of the same types, composite steel, dissimilar steel, etc. in the production of equipment of synthetic fiber, petrochemical industry, etc., and also used for surfacing welding on nuclear reactors and transition layers of pressure vessel inner surfaces and welding inner parts of synthesis towers.
E316LT1-1	E316LT1-1		Used for welding ultra-low-carbon 00Cr18Ni12Mo3 stainless steel, and also used for welding Cr stainless steel which does not need heat treatment after welding, composite steel and dissimilar steel.